Yes, you can use a .dmg file directly, and IIRC as long as it not compressed depending on how it was made, however the only supported Mac OS X/OS X are Mac OS X 10.5 Server, Mac OS X 10.6 Server, Mac OS X 10.7 Client/Server and OS X 10.8 Client/Server.
Mac Os X 10.8 Dmg Vmware
After Unlocker crack, start VMware Workstation normally create a virtual machine, select "Apple Mac OS X" (depending on the Mac OS installation disk in the system, select the corresponding version of the correct version, here I use a Mac OS X Mountain Lion, version 10.8 64-bit). Creation process has the following non-default configuration:
While most of the VMWare guest hardware is virtualized, the guest VM CPU reflects the same CPU features the physical host CPU has.This guide details the additional work that is needed to run OS X 10.8-10.12 with an AMD CPU under VMWare.
The installation should be pretty simple:1. Install VMWare Workstation 8.0.6 / 9.0.4 / 10.0.4 / Player 6.0.4.2. Run VMWare Unlocker 1.3.0.3. Prepare an installation ISO from the untouched 10.8 (Mountain Lion) DMG using dmg2img.4. Create a new VM (select "Mac OS X 10.8" as the guest operating system).5. Set your 'number of cores per processor' to 1 (the number of processors can be set to more than one).6. A. For OS X 10.8-10.11:
1. After you have a working OS X machine, update to 10.8.5, make a copy of the virtual disk and attach it to the same VM.2. Change the os settings to show hidden files (see here), and delete the hidden 'mach_kernel' from the root folder of the attached disk.(alternatively, use the terminal to perform this, e.g. 'sudo chflags nohidden mach_kernel' or 'sudo rm mach_kernel')3. Put the modified kernel (see below) instead of the one you just deleted (use the same file name).4. Delete the old kernel cache by deleting the content of the '/System/Library/Caches/com.apple.kext.caches/' directory.5. Optionally: hide back the kernel (with 'sudo chflags hidden mach_kernel').6. Create a new VM, update the .vmx files to include the 8 cpuid.* lines from above.7. You can now use the attached disk to boot OS X 10.8.5 from a VM hosted with an older AMD CPU that does not support SSSE3.Tested With A8-5600K, A8-3850 and VMWare Workstation 8.0.6 / 9.0.4 / 10.0.4 / Player 6.0.4Modified Kernel:For your convenience, I have created a modified 10.8.5 kernel (a.k.a. xnu-2050.48.11) specifically to be used with VMWare, and attached it to this post.The only modification to this kernel is that it includes OpEmu3, the SSE3 and SSSE3 emulator created by Sinetek and AnV (thanks guys!).This emulator is only used when necessary (i.e. if your CPU support a specific instruction, the emulator will not be used to execute it).
A mac os x mountain lion 10.8 ISO is still without a doubt the most popular operating system for the old model MacBook the size of mac os x mountain lion 10.8 ISO is just 4GB and you need just 10GB HDD from installation apple has really made a great operating system that runs very smoothly and is very functional for the users the user interface is easy to use and extremely straightforward for any user of macs. mac os x mountain lion 10.8 iso google drive will run on most types of MacBooks if it is old or new still you can install it.
If you are not comfortable with mac os x mountain lion 10.8.5, then you can download the Higher version for free from our website such asMac OS X Mavericks 10.9 ISO or Mac OS X Yosemite ISO
Mac OS X Mountain Lion 10.8 has been redesigned and improved with new features that make the whole system more user-friendly and efficient, but most of all, it is designed to make the work a lot easier for the user. The biggest change that the Mountain Lion system comes with is the built-in task manager, The better-designed task manager in Mountain Lion allows you to easily start up applications without wasting much time at all.
it is not the task manager or the Finder window that is the most important improvement that has been made in Mac OS X Mountain Lion10.8. In fact, it is the new feature called Dashboard, which makes it easier for Mac users to do their work. With this handy tool, they can access information from any source with just a couple of taps on the screen.
if(typeof ez_ad_units!='undefined')ez_ad_units.push([[728,90],'sysprobs_com-box-3','ezslot_3',117,'0','0']);__ez_fad_position('div-gpt-ad-sysprobs_com-box-3-0');VMware and VirtualBox made Hackintosh easy by allowing us to use them simultaneously as a virtual machine on the same host computer. In this post, we will talk about how to use the preinstalled VMware image of OS X 10.8 on a Windows OS physical computer.
The preinstalled image and Torrent file we talk about in this article was created by a separate team called souldevteam back in the year 2012. Unoftuntily, the website and team are not active anymore to download the file from their website. Mountain Lion OS X is an outdated Apple OS. There are many other latest versions available, we covered them here. It is highly recommended to use the latest releases except you have some special requirements to test the OS X 10.8 currently.if(typeof ez_ad_units!='undefined')ez_ad_units.push([[580,400],'sysprobs_com-medrectangle-3','ezslot_7',105,'0','0']);__ez_fad_position('div-gpt-ad-sysprobs_com-medrectangle-3-0');This method is completely for testing and learning purposes only.
6) That should open the pre-installed Mountain Lion virtual machine configuration. Before powering it on, you can modify the processor and RAM settings depending on available hardware resources. I increased the RAM size to 2GB and the number of processor cores to 2 since I had core2duo physical processor.7) Power on the virtual machine now. If all settings are correct, the Mac OS X 10.8 virtual machine will start with the initial setup screen as shown below.if(typeof ez_ad_units!='undefined')ez_ad_units.push([[336,280],'sysprobs_com-banner-1','ezslot_12',110,'0','0']);__ez_fad_position('div-gpt-ad-sysprobs_com-banner-1-0');
After completing the initial configurations, you should land on the mountain lion OS X desktop without any issues.I recommend taking a snapshot now before proceeding further.Install VMware Tools on Mac OS X 10.8Network and sound/audio worked out of the box without additional installations or settings.
9) After the virtual machine is restarted, you will find more screen resolutions under display settings. Also, the full-screen mode (from the VMware menu bar) will work now.VMware Shared Folders on Mountain Lion 10.8 and Windows OSIf you like to transfer files between Mac OS X guest and Windows hosts frequently without any types of networking connectivity or sharing, then you can use VMware shared folders feature. This will work only after VMware tools installation.
You will find a new drive under the computer on Mac OS X. By opening the drive you can access Windows OS files and folders from Mac OS. Depending on the mode you selected (whether read-only or write access), you can save the data too. This is the fast and easy method to transfer files and folders between Mac OS X 10.8 guest and Windows host machines. I hope this guide is helpful to find out how to use the pre-installed VMware image of Mac OS X 10.8 Mountain Lion on a Windows Operating System.
2. The Mac OS X 10.8 (Mountain Lion) image will be downloaded directly into the Applications folder. Be sure to make a copy of this 4 + GB file before performing any upgrades to your local Apple device. The installation scripts clean/delete the installation package after the upgrade from 10.7 to 10.8 is completed.
I have a MacBook that is running 10.8.5 inside VMWare and a remote Mac that is running 10.8.5 natively. They both have Teamviewer 9 installed. When i try to connect from the VMWare machine to the remote machine, I get the "Version out-of-date: Update the remote Teamviewer" errror, which is telling me that the remote machine is running an old version of Teamviewer. Can this be the case if they are both running verison 9? Is it still possible to connect 2 older versions, if they are the same version? Do I have to have them both linked to the same account?
Apple has announced that it will stop supporting macOS X 10.8 Mountain Lion on April 24, 2017. Apple will continue to provide security updates for the current version of macOS 10.12 Sierra for an additional year, until September 2018.
Upgrading Mountain Lion to Mavericks - Explains how to upgrade a Gigabyte Z68X-UD3H-B3-based Hackintosh from OS X 10.8.5 Mountain Lion to OS X 10.9 Mavericks using MultiBeast, Chimera, and other apps.
Although hardware compatibility is essentially identical to OS X 10.11 "El Capitan," OS X 10.10 "Yosemite," and OS X 10.9 "Mavericks," Hackintosh installation procedures and tools can be different for OS X 10.8 "Mountain Lion":
Install OS X 10.8 Mountain Lion - A complete OS X 10.8 "Mountain Lion" Hackintosh installation guide from the legendary tonymacx86 using the site's UniBeast installation tool. The site covers the OS X 10.8.1, 10.8.2, 10.8.3, 10.8.4, and 10.8.5 updates, too.
Install OS X 10.8 Mountain Lion with myHack - An installation guide for OS X 10.8 "Mountain Lion" using the sophisticated myHack app (no longer online), which has more features than UniBeast and may be of interest accordingly.
Install OS X 10.8 Mountain Lion with UniBeast - If the "official" tutorial from tonymacx86 wasn't enough, this one from MacBreaker may help. The same site also covers how to install both of the dodgy iATKOS and Niresh distros of "Mountain Lion" as well as how to install "Mountain Lion" in Virtualbox with Hackboot. 2ff7e9595c
Comments